Material Hoist AT30L, AT30HL, AT40 & AT40H

Specs

The versatile AT30L and AT40 material hoists from De Jong’s Liften have a lifting capacity of 300 kg (230V) and 400 kg (400V) respectively. The freestanding height of 9 metres means the hoists can be put to use at a construction site from an early stage. The maximum mast height is 40 metres, with a platform size of 155 x 130 cm or 155 x 90 cm. The H series is equipped with a tilting mast.

  • The AT30L/HL and AT40/H are fully compliant with machinery directive 2006/42/EC and approved in accordance with NEN-EN 12158-1+A1.
  • The AT30L and AT40 rack and pinion hoists have separate stabilisation beams and a folding platform. The AT30L/HL and AT40/H have a tilting mast (max.    9 m), which is operated with a manual winch. There is a De Jong material hoist available for every situation and location, indoors or out.
  • The platform is equipped with a 110 cm entry ramp and a 60 cm exit ramp and is enclosed with a 110 cm high fence. A low base enclosure and side protection are available as options.
  • The hoists are equipped with a centrifugal brake.
  • Accessories: sliding landing gates, landing controller (ESU), swapping set, lubrication system.
AT30LAT30/LHAT40AT40/H
Lifting capacity300 kg300 kg400 kg400 kg
Plattform size (standard)155 x 130 cm155 x 130 cm155 x 130 cm155 x 130 cm
Platform size (option 1)155 x 90 cm155 x 90 cm155 x 90 cm155 x 90 cm
Lifting speed12.6 m/min12.6 m/min16.2 m/min16.2 m/min
Number of persons0000
Tilting frameNoYesNoYes
ESUOptionalOptionalOptionalOptional
Mast height anchored (max)40 m40 m40 m40 m
Mast height freestanding (max)9 m9 m9 m9 m
Anchor distance6 m6 m6 m6 m
Mast height above top anchor3 m3 m3 m3 m
Distance cable guide4.5 m4.5 m4.5 m4.5 m
Supply Voltage230V230 V400 V400 V
Connection16 Amp16 Amp25 Amp25 Amp
Motor rating1.5 kW1.5 kW3 kW3 kW
Meer informatie over onze producten?

Neem vrijblijvend contact met ons op!

More information about this product?